減量秤

發布時間：2019/1/7 11:31:38      點擊次數：8

減量秤
Weight in Loss Feeder
 

       百靈DCS系列減量秤，又稱為失重秤，是一種間斷給料連續出料的稱重設備，由于失量控制是在料斗中進行，可達到較高的控制精度，全密封結構，無環境污染，故在粉料控制時與用螺旋秤來相比是一大提高。適用于水泥、石灰粉、煤粉等微細物料的控制配料。


Braun series DCS reduction scale, also called for weightlessness balance, is a kind of discontinuous feeding continuous material weighing equipment, due to the loss of control is carried out in the hopper, achieve high control precision. fully sealed structure. no environmental pollution, so in powder control and with the spIral balance compared to is a great improvement It is suitable for the control of the fine materials such as cement. lime powder. pulverized coal and so on
工作原理

      根據稱重斗中物料重量的減少速率來控制出料螺旋機或給科機，以達到定量給料的目的，即減量秤，當稱重斗的物料達到稱重下限位置時，出料螺旋機則按照當時的轉速固定出料暈，同時控制料倉里的物料快速下到稱重斗內，當裝料到稱重上限時停止裝料，快速裝料可以縮短給料時間，提高稱重的準確度和控制精度。


Working principle

According to the weighing bucket in material weight reduction rate to control discharge screw conveyor or feeder. to achieve the quantitative data, ie. reduction scale. when the weighing bucket material to weighing the lower limit position. spiral machine according to the speed at the time of the fixed quantW of the discharging and controlling the material warehouse material rapidly down to the weighing hopper. when charging to the weighing limit stop charging, fast charging can relationship to feeding time and improve the accuracy of weighing and control precision


主要技術參數
系統計量準確度： ≤0 5%；
系統配料準確度 ： ≤0 5%；
配料計量控制范圍：0.01-300t/h；

適用范圍連續式穩定土、混凝土攪拌站水泥配料煌結定量控制給料，煤粉定量控制給料及各種濃漿料的配料等。


Technical parameter
The sVstem measurement accuracy: less than ≤0.5 % .
The batching system accuracy: less than ≤05% ;
Batching metering control range: 0.01 -300t/h
Application
continuous stabilized soil. concrete mixing station cement batching control feeding, pulverized coal quantitative control feed and a variety of concentrated slurry ingredients. etc .